You can't break it any worse. To elevate the board in the oven, I placed it face down on three (golf ball-sized) balls of crumpled aluminum foil on a cookie sheet (that I had already lined with Anonymous said... This works proof here.http://www.youtube.com/watch?v=JRBTrYutFbc William said... navigate here
on October 6, 2011 at 9:15 AM This just totally saved my ass! If you prefer to consider replacing the printer, we recommend the LaserJet 1320 series or LaserJet 2430 series as good replacements for this model. I stripped a head pretty well and had to drill it out. Could be something as simple as a cold surface mount solder joint. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00763560
on August 1, 2013 at 7:21 AM Honestly, this worked! To get to the formatter board take off the left plastic panel - pry it open with flat screwdriver from the back. Had to add in my thanks as well! Anonymous said...
on July 28, 2010 at 7:12 PM Not sure Patrick. by Anonymous on May 5, 2009 at 7:12am Add comment Please sign in to comment 0 I bought the P2015 originally because of the HP brand. I put the printer back together, and it is working again, for now. Hp Laserjet P2015 Error Lights (leds) Stuck On han said...
I hope it lasts.Shame on HP. 2015dn Manual GREAT ADVICE - THANKS! At this point the indicator lights on the printer will start to cycle and then eventually stop. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01592312 Han said...
Midnight Mods Voiding warranties since 2001 Did we help with your project? Hp Laserjet P2015 Paper Jam Light Stays On on October 21, 2010 at 5:32 AM Worked perfectly! R said... Sigh I wish HP quality was what it used to be.
She thinks it was a bug in the first version of the new hardware.All in all, not a horrible experience. Pitty that this solution wasn't discovered earlier: another Laserjet P2015 is completely non-functional after a firmware upgrade (which was the solution HP originally suggested) failed. Hp P2015 Toner Light Stays On Who's going to be first? Hp Laserjet P2015dn Error Lights Pulled it out a few days ago and baked the board.
Just tried it in the toaster oven here at work ... check over here Generated Thu, 29 Sep 2016 20:22:31 GMT by s_hv999 (squid/3.5.20) For my next printer, I'll try ANYTHING but HP! The lights produce patterns that identify the printer status. 1 Jam light: Indicates that there is a jam in the printer. 2 Toner light: When the print cartridge is low, the Hp Laserjet P2015 Error Lights
Manual Feed or Continuable Error This state can be reached in the following circumstances: Manual feed General continuable error Memory configuration error Personality/Job related error To recover from the error and Can't thank you enough...bud light solutes you, a real man of genius! Open the print-cartridge door.2. http://redstart.net/hp-laserjet/hp-laserjet-p2015-error-lights.html The formatter is actually locking up during the initializing stage.
I would recommend them for repairs. Hp Laserjet P2015 Attention Light Blinking To reset the formater board: turn off the machine, turn on the machine while holding down the green button. Toner Low The Go, Ready, and Attention lights act independently of the Toner Low state.
then bake. All the LaserJets I has used at the office were rock-solid. I was asked to change the formatter card for the second time for my HP P2015dn. Hp Laserjet P2015 Manual Thanks to all for posting.
I tried it last night as a last-ditch effort, and it WORKED!It's a leap of faith, I know, so go at _your_own_risk_. Thanks a million!Justin by jlkoch on Sep 10, 2009 at 6:04pm Add comment Please sign in to comment 0 OK.... by unknown on Oct 21, 2009 at 1:25pm Add comment Please sign in to comment 0 The baking at 360F for 8 minutes worked for me, too! http://redstart.net/hp-laserjet/hp-laserjet-p2015-error-lights-leds-stuck-on.html by mosbad on Oct 27, 2009 at 6:48am Add comment Please sign in to comment 0 We have a 2015 got exactly the same problem since a few days ago.
on May 21, 2011 at 11:16 AM The oven method worked like a charm! Thanks for this great tutorial. Yes, the screws that hold the board are tight, but I suggest using a high quality, instrument type screw driver (I use a Wiha precision screw driver -about $5). Well, if you haven't figured it out yet, the heat is going to make all the solder on the board liquid, including (hopefully) the solder under that darn BGA chip.
Thanks to everyone who shared the details on how to do this. The good news is the formatter board is not a difficult part to replace. I've baked the board 3 times now. Anonymous said...
Only problem is my formatter was the network version and it seems to have melted the network port a bit and thus can not use it for network printing. by moe on Sep 11, 2009 at 5:31pm Add comment Please sign in to comment 0 Add another 8min/350F baking success story!Fighting with my 2015 for months now (out of warranty) Would never have done the whole operation without the videos.Thank you very much!